Insulation Cushion Foam
Application
- Mostly used for knee pad / garden pad in
industrial fields.
- Cushioning material.
Advantage
- Soft, pliable, and tough.
- Exceptional stability in extremely low temperature.
- Low compression set.
- Excellent thermal insulation.
- Self-extinguishing.
- Resistant to most chemicals, petroleum
products, and humidity, will not rot.
- Impact cushioning.
- Not include CFC ozone depletion materials
(tested by TÜV, Germany) & Free of 10
Phthalates.
(DBP,BBP,DENP,DINP,DNHP,DIBP,DNPP,DCHP,DIDP,DNOP)
Fabrication
- Cutting,
die-cutting.
- Adhesive bonding, welding.
| Standard Sheet Size | Units | Test Method |
![]() AP-702CF |
![]() TAPE |
![]() NV-904S |
![]() NV-904C |
![]() NV-400C |
| Standard Sheet Size | in cm |
48x72 120x182 |
42x72 106x182 |
36x54 91x137 |
36x84 91x213 |
24x72 60x180 |
|
|
Standard Roll Width |
in cm |
48/56 120/142 |
42 106 |
36 91 |
|||
| Max. Gauge |
in cm |
1.25 30 |
0.25 7 |
1 25 |
1 25 |
0.75 20 |
|
| Colors (other colors available) |
Blk* | Blk | Blk* | Nat/Blk | Red/Green/BLue | ||
| Density (P.C.F) |
lb/ft3 g/cm3 |
3.5-5.0 0.06-0.08 |
5.5-7.0 0.09-0.12 |
7.5-9.5 0.12-0.15 |
7.5-9.5 0.12-0.15 |
3.7-5.6 0.06-0.09 |
|
| Compression Deflection (25%,Psi) |
lb/in2 kg/cm2 |
ASTM D1056 |
1.5-4.0 0.11-0.28 |
2.5-5.0 0.18-0.35 |
3.5-5.0 0.25-0.35 |
3.5-5.0 0.25-0.35 |
3.0-5.0 0.21-0.35 |
| Compression Set (50%) |
%Max |
ASTM D1056 |
20 | 20 | 15 | 15 | |
| Water Absorption (Vacuum Method) |
Wt%Max |
ASTM D1056 |
8 | 5 | 5 | 8 | 8 |
| Water Absorption |
Ibs/Sq.Ft |
ASTM D1667 |
0.1 | 0.1 | 0.1 | 0.1 | |
| Heat Aging (7 Days @ 158°F ) Lineal Shrinkage |
%Max |
ASTM C548 |
5 | 5 | 5 | 5 | 5 |
| Tensile Strength |
lb/in2 kg/cm2 |
ASTM D412 |
50 3.5 |
100 7 |
90 6.5 |
100 7 |
55 4 |
| Elongation |
%Min |
ASTM D412 |
230 | 320 | 350 |
350 | 180 |
| Thermal Coductivity 75 °F(24 °C) |
BTU.in/hr. sqft. °F Max |
ASTM C177 |
0.27 | 0.31 | 0.31 |
0.31 | |
| Specification |
ASTM D1056-68 ASTM D1056-91 |
SCE-41 2C1 |
SCE-41 2C1 |
SCE-41 2B1 |
SCE-41 2B1 |
SCE-41 2C1 |
UL Approved Flame Resistance Foam (E238526 – Plastics – Component)
ULC
Approved Flame Resistance Foam (E238526 – Plastics Certified for Canada
– Component)
Gel Foam
Application
- Soft medical cushions & protectors
- Sporting protectors and pads
- Saddles
- Glove
- Insoles
Advantage
- Soft, pliable, and tough
- Light weight
- Super impact cushion
- Excellent thermal insulation
- Self-extinguishing
- High resistance against heat, cold, humidity, mildew, and rotting as well as against most oils and chemicals, thereby guaranteeing durability.
- High resistance against bacteria
- Not include CFC ozone depletion materials (tested by TÜ V, Germany)
- No irritation to skin; easy to clean
Fabrication
AQUA ELITE CORP Gel-Foam can be fabricated in many ways using conventional machines and equipment by:
- Cutting, Die-Cutting
- Adhesive Bonding, Welding
- Sewing, Stitching
Typical Physical Properties and Characteristics of AQUA ELITE CORP Gel-Foam: G-20
| Standard Sheet Size | Units | Test Method |
G-20 |
|
Density |
lb/ft3 g/cm3 |
7.0-9.4 0.11-0.15 |
|
|
Water Absorption |
Wt%Max |
ASTM D1056 | 5 |
| Compression Deflection (25%) |
lb/in2 kg/cm2 |
ASTM D1667 |
3-4.5 0.21-0.32 |
| Tensile Strength |
lb/in2 kg/cm2 |
ASTM D412 |
70 5 |
| Elongation |
%Min |
ASTM D412 |
350 |
| Compression Set (50%) |
ASTM D1056 |
10 |
ASTM method, in some cases, may be modified slightly to make results more meaningful for end-use application.





